Hack(OWN) a Computer Using Cyber Gate Rat (Final/Closed)

Hack(OWN) a Computer Using Cyber Gate Rat (Final/Closed)

In this article, I am gonna post the most useful way on how to hack Computers ,email account passwords. 
This hacking software used to hack Computers ,All account passwords or we can say OWN the Computer is Cybergate RAT. 
RAT, as we all know, is Remote Administration Tool, used to hack computer remotely. 
Cybergate RAT is very efficient and simple to use to hack Systems Fully.

I will provide you with the cybergate paid version and it is cracked for you

IMPORTANT ---------
It is of course going to set off your antivirus.
As is it in fact a Trojan Virus and backdoor program.
The AV Detection Is False Positives, Dont Worry.
So i suggest turning your A/V off as it will delete the file automatically.
--------------------------

This is a straight forward RAT and is easy to use, with many different functions.

Ok,so lets get started:

Requirements:
-------------------->                 No-Ip.
-------------------->      CyberGate v1.07.5
-------------------->       Port Forwarding


Part 1 :- Setting Up The No-IP & Client 

1.Start Off By Going To; No-IP.com And Register. If You Have An Account There Already, Then Just Log In.

2. Once You've Logged In, Press "Add Host"

3. Now It's Time To Choose Your Host Name!

Hostname: Your Host Name (anyname you want), 

Host Type: DNS Host (Check On DNS Host)

Dont Care About The Rest, Once You've Choosen Your Host Name,rest leav as default.Press "Create Host" In The Lower Right Bottom.

4. The Host Is Now Finished! Lets Move On To The No-IP Client.

The No-IP Client You Downloaded In The Beginning, Extract It To Your Desktop & Install It.

Now When You've Installed It, Open It Up & Log In With Your No-ip Username & Password.

When You're Logged In Press "Select Hosts" And Then Check That Little Box With Your Hostname.

Note: Always Have No-IP Open When You Have Cybergate Open!

5. Your No-IP Host & Your No-IP Duc Is Now Sat Up! End Of Part 1.

PART 2 :-  Setting Up Cybergate 1.07.5

1.Cybergate File You Downloaded In The Beginning To Your Desktop!

Once Extracted, Open It & Wait 20 Seconds For The Agreement To Pass! :)

2. When It's Open, Press: Control Center -> Start.

3. Press: Control Center -> Options -> Select Listening Ports.

4. Once You've Pressed The "Select Listening Ports" This Window Should Appear: 

Firstly, Write "100" In That Little Box And Press The Blue Arrow. Then It Should Appear Under "Active Ports"

Active Ports: The Port You Will Forward Later!

Connections Limit: The Max Amount Of Victims You Can Have.

Connection PW: The Connection Password. Use "123456"

[V] Show Password: (Shows Password)

Once This Is Done, Press "Save"!

5. Now We'll Go To The: Control Center -> Build -> Create Server.

User: First, Press "New" And Name It To: "Plutonium". Once Done, Press "OK"

Now Just Double Click On "Plutonium" Or Press "Plutonium" And Then Press "Forward"

6. Now We're In The "Connection" Tab.

First, Press "127.0.0.1 - 999" And Then Press Delete.

Now Press "Add" And Write Your Hostname In It + :100.

Like This: YourHostName.No-ip.biz:100

Change The Identification To: Cyber

Change The PW To: 123456

**Note, If You Want To Try The Server On Yourself, Then Delete Both:
- 127.0.0.1:999
-YourHostName.No-ip.biz

And Replace Them With; 127.0.0.1:100 Since 127.0.0.1 Means "Local Computer & LAN Internet"

7. Once You're Done With Theese, You'll Move On To The "Installation" Tab

 Have The Same Settings As I Do, And Follow The Instructions In The Image!

--//--//--//--//--//--//

Install Directory: Where The Server Installs,

%System%
%Windows%
%Root%
%Program Files%
%Other%

Use The "System"! :).

Boot: This Is The "Startup" Option. Have Everything Checked & Press "Random" 5 Times And It Will Startup On Your slave Everytime They Start Their Computer!

Directory: Where The Virus Folder Installs

File Name: What The File Will Be Inside The Folder.

Inject Into. What Process It Injects into, Use Default Browser!

[V] Persistance: Keeps Trying To Inject Until Succed.
[V] Hide File: Hides The File, (Not FUD Though!)
[V] CCD: Changes The Creation Date From 16th July To 4 September 2005.

Mutex: Mutex Of The Server, Just Press Random A Couple Of Times!

There We Go, You've Now Completed The "Installation" Tab!

--/ Skip The Message & Keylogger Since They Are Pre-Set Already!

8. You Should Now Have Trumbled Into The "Antis" Tab, Have Everything Checked! (Except SANDBOXIE If You Are Gonna TRY IT ON YOURSELF!)

9. Ok, The Final Tab.. "Creation Of The Server". Have Every Setting As Me!

[V] Use Icon: Yes

[V] Delayed Execution: (How Many Seconds It Takes Until Your Server Injects And They Pop Up In Your RAT)

[V] Google Chrome PW: Yes, Steals Their GC Passwords :)

[X] Bind Files: No, Get An Real Binder Instead! (Have Your Server Crypted Though First!)

[X] Compress With UPX: Makes The Server Smaller But More AV's Detects It!

10. There! Your RAT Is Now Fully Sat Up.

Part 3 :- Port Forwarding

1. Go To; Start > Run > CMD. And In The Command Box. Type: Ipconfig,

2. Now Look For Something Named: Default Gateway Or Standard Gateway. (Usually 192.168.1.0).. There Should Be like.. 10 Numbers, Remember Thoose.

3. Go To Your Internet Browser And Type Thoose Numbers In.

4. You Have Now Come To Your Router Page.

5. Lookup The "Virtual Server" Or "Port Forwarding" Page And Port Forward The Port:100

6. As Internet Protocols, Use BOTH Tcp And Udp For The RAT To Work.

7. Press "Save" Or "Apply"!

8. Go To: HERE

9. Write In Port: 100 And press Check!

10 If It Says: 

Success: I can see your service on ***.***.**.*** on port (100) Your ISP is not blocking port 100

Then You Have Succedfully Port Forwarded And Can Start Spreading Your RAT Virus! 

10. But If It Says:

Error: I could not see your service on ***.***.**.*** on port (82) Reason: Connection timed out

Then You Have NOT Port Forwarded Correctly, Just Try Until You Get It Forwarded !

For Further Help With Port Forwarding..  Visit HERE.

                                                                             OR

1. first download the program from HERE

2. after installed, run it and you will have somethin like this.

3.then choose your router ( usually the program detects it by itself )

4.to port forward,simply click " which ports you need to forward ".

5.choose " Add custom " 

6.  Enter a name ( anything ) and the ports you wanna forward for example 80~100

7.click Add.

8.In the main page,Click "update router"

THATS ALL!



Now, some FAQs ;

Q: What is CyberGate?
A: CyberGate is a remote administrative tool or trojan for Windows operating systems. You can use CyberGate to manage computers, monitoring your child etc.

Q: Where can I get CyberGate?
A: There is an website for CyberGate, but you can easily download it from my thread.

Q: What operating systems are supported by CyberGate?
A: Windows 95/95B
Windows 98/98SE
Windows ME
Windows NT 4.0
Windows 2000
Windows XP
Windows Vista
Windows 7

Q: Will CyberGate slow my computer?
A: No. CyberGate won't slow your computer, it is a small program and works in background and has been optimized to minimize resource use.

Q: When I downloaded CyberGate, I can't extract it, a problem occurs. What should I do?
A: That's because of your anti virus, they detect it as unwanted applications so your anti virus could prevent downloading. Disable your anti virus and try again.

Q: When I have downloaded CyberGate, my antivirus detect it as virus. What should I do?
A: Well, since RATs are hacktools, and all the hack tools are detected as viruses, Turkojan is detected as virus also. To download and install CyberGate you will need to turn off your anti-virus.

Q: Why should I use no-ip?
A: If you don't have a static IP, you're IP will change each time your Internet reconnects so the server won't be able to reach you. To prevent loosing victims because of your dynamic IP, you will need no-ip host.

Q: What should I do after I install my server?
A: After you install your server, you should spread it. 

Q: I've created a server, but I don't see it in the directory. Why?
A: That's caused by your antivirus. The server is detected, and it won't let it. I suggest you to remove or just simply de-activate your antivirus if you are going to use RATs.

Q: I've send my server to a friend on MSN, but he doesn't connect.
A: That's because he has an antivirus or firewall and it won't let him to connect in your RAT. To make it FUD, (Fully Undetectable), you should use a crypter.

Q: Is CyberGate illegal?
A: No. CyberGate is a legal RAT. The author of CyberGate created his program for legitimate purposes. For example, there are many legal activities. Parents can use keyloggers to protect their children from online abuse etc. Some people use it for stealing passwords, credit cards and more but it's not a software which breaks the law, but the person who uses it.

Q: Can CyberGate be used for legitimate purposes?
A: Yes. You can monitor your children online activity.. to make sure they don't visit pornographic websites. You can find out if someone uses your computer while you are away, ensure no one is accessing your personal files while you are away and more.



Quick Troubleshooting If Your RAT Doesent Work:

Non-Connecting RATs

Make Sure That....

1. ..You are properly port-forwarded if using a router.
2. ..You have the No-IP Client installed and running.
3. ..Your DNS entries are correctly spelled when building your server.
4. ..The password in Listening Ports and the password your server uses are identical.
5. ..You are Listening on the correct ports.
6. ..Your Firewall is letting connections through on the port you're listening on.
7. ..Your server is added to excluded files in your Antivirus and Firewall.

''//'' If You Have ANY Troubles With This, Feel Free To PM Me & I'll Reply As Fast As I Can.


Thank YOU :)